Properly select and design a process dehumidifier
Article Abstract:
The design of dehumidification systems can be done through several steps. The purpose do the design project must first be defined, so that engineers can prioritize decisions in the order of their importance. For instance, there is no reason to maintain a relative humidity of +/- 1% to prevent the growth of mold on starch on a storage silo. Next, control levels and tolerances should be established to be followed by the calculation of moisture loads.
Publication Name: Chemical Engineering Progress
Subject: Engineering and manufacturing industries
ISSN: 0360-7275
Year: 1998
User Contributions:
Comment about this article or add new information about this topic:
Moving bed cooler offers low energy demands
Article Abstract:
DeSpain/Babcock offers a cooler that uses groundwater as its initial source of cooling water. It is capable of cooling free-flowing powders down from temperatures as high as 1,500 degrees Celsius to 25 degrees Celsius. The cooler does not require fans and only one motor closes or opens the discharge valve at the base of the unit. The unit is installed vertically, thus it provides a smaller footprint than most other standard coolers.
Publication Name: Chemical Engineering Progress
Subject: Engineering and manufacturing industries
ISSN: 0360-7275
Year: 2001
User Contributions:
Comment about this article or add new information about this topic:
Understand freeze-condensation vacuum systems
Article Abstract:
The article illustrates the advantages of placing a freeze-condenser ahead of an ejector system.
Publication Name: Chemical Engineering Progress
Subject: Engineering and manufacturing industries
ISSN: 0360-7275
Year: 2001
User Contributions:
Comment about this article or add new information about this topic:
- Abstracts: Proprietary and open protocols: the trade offs. The lowdown on telecom layout. 'Future-proof' wiring - or no wires at all?
- Abstracts: Ease relief system design and documentation. Solve instrument seal problems. Membranes remove N2 from fuel cell feed
- Abstracts: Fuzzy multi-criteria decision-making procedure for evaluating advanced manufacturing system investments. The development of a decision support tool for the selection of advanced technology to achieve rapid product development
- Abstracts: Fuzzy multi-criteria decision-making procedure for evaluating advanced manufacturing system investments. part 2
- Abstracts: Model 2060 control valve. Series 2700 balanced design pressure relief valves. Poppet valves